Kobo Hacks Database

47 hacks for Kobo firmware 3.17.3 (407d48ba86)

Id	Name	Description
khd-406	Disable pinch-to-zoom font resizing	Prevents the pinch gesture resizing the font when reading k/epubs (on Aura or other devices with a multitouch kernel). Pinch to zoom images still works. libnickel.so.1.0.0<Patch> patch_name = `Disable pinch-to-zoom font resizing` # # Prevents the pinch gesture resizing the font when reading k/epubs (on Aura # or other devices with a multitouch kernel). Pinch to zoom images still works. # patch_enable = `no` replace_bytes = 8D9588, 04 46 2D ED 04 8B, BD E8 F0 8F 00 46 </Patch>
khd-405	Un-Force user text-align in div,p tags in KePubs	This patch allows the text alignment set by the publisher in the kepub stylesheet to override the alignment selected by the reader from the device. div, p { text-align: %1 !important; } --> body { text-align: %1 !important; } libnickel.so.1.0.0<Patch> patch_name = `Un-Force user text-align in div,p tags in KePubs` patch_enable = `no` # Multi-version patch: 3.3.0 - 3.17.3+ # # This patch allows the text alignment set by the publisher in the kepub # stylesheet to override the alignment selected by the reader from the device. # # div, p { text-align: %1 !important; } # --> body { text-align: %1 !important; } # find_base_address = `d\0i\0v\0,\0 \0p\0 \0{\0 \0t\0e\0x\0t\0-\0a\0l\0i\0g\0n\0:\0 \0%\01\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}` replace_string = 0000, `d\0i\0v\0,\0 \0p`, `b\0o\0d\0y\0 \0 ` </Patch>
khd-404	Un-force font-family override p tags (std epubs)	This patch allows the font set for paragraphs by the publisher in the epub stylesheet to override the font selected by the reader from the device. body, p { font-family: -ua-default !important; } --> body { font-family: -ua-default !important; } libnickel.so.1.0.0<Patch> patch_name = `Un-force font-family override p tags (std epubs)` patch_enable = `no` # Multi-version patch: 3.3.0 - 3.17.3+ # # This patch allows the font set for paragraphs by the publisher in the epub # stylesheet to override the font selected by the reader from the device. # # body, p { font-family: -ua-default !important; } # --> body { font-family: -ua-default !important; } # find_base_address = `b\0o\0d\0y\0,\0 \0p\0 \0{\0 \0f\0o\0n\0t\0-\0f\0a\0m\0i\0l\0y\0:\0 \0-\0u\0a\0` replace_string = 0000, `b\0o\0d\0y\0,\0 \0p\0`,`b\0o\0d\0y\0 \0 \0 \0` </Patch>
khd-403	KePub fixed font sharpness	This patch causes a fixed value for font sharpness to be used in kepub books, instead of the value set by the advanced font sharpness/weight slider. The slider sharpness values range from -0.4(min.) to 0.2(max.), default -0.0666. This patch allows one of three fixed values: 0.0, 0.1, or 0.2. body { -kobo-font-sharpness: %1; -kobo-font-thickness: %2; }\n --> body{-kobo-font-sharpness:0.0/%1/;-kobo-font-thickness:%2}\n libnickel.so.1.0.0<Patch> patch_name = `KePub fixed font sharpness` patch_enable = `no` # Multi-version patch: 3.11.0 - 3.17.3+ # # This patch causes a fixed value for font sharpness to be used in kepub books, # instead of the value set by the advanced font sharpness/weight slider. The # slider sharpness values range from -0.4(min.) to 0.2(max.), default -0.0666. # This patch allows one of three fixed values: 0.0, 0.1, or 0.2. # # body { -kobo-font-sharpness: %1; -kobo-font-thickness: %2; }\n # --> body{-kobo-font-sharpness:0.0/%1/;-kobo-font-thickness:%2}\n # find_base_address = `b\0o\0d\0y\0 \0{\0 \0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0s\0h\0` replace_string = 0000, `b\0o\0d\0y\0 \0{\0 \0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0s\0h\0a\0r\0p\0n\0e\0s\0s\0:\0 \0%\01\0;\0 \0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0t\0h\0i\0c\0k\0n\0e\0s\0s\0:\0 \0%\02\0;\0 \0}\0\n\0`, `b\0o\0d\0y\0{\0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0s\0h\0a\0r\0p\0n\0e\0s\0s\0:\00\0.\00\0/\0\0%\01\0\0/\0;\0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0t\0h\0i\0c\0k\0n\0e\0s\0s\0:\0%\02\0}\0\n\0` # # Replacement sharpness value: `0` = 0.0, `1` = 0.1, `2` = 0.2. # replace_string = 0038, `0`, `2` </Patch>
khd-402	ePub fixed font sharpness	This patch causes a fixed value for font sharpness to be used in epub books, instead of the value set by the advanced font sharpness/weight slider. The slider sharpness values range from -0.4(min.) to 0.2(max.), default -0.0666. This patch allows one of three fixed values: 0.0, 0.1, or 0.2. -kobo-font-sharpness: %1; --> -kobo-font-sharpness:0.0; libnickel.so.1.0.0<Patch> patch_name = `ePub fixed font sharpness` patch_enable = `no` # Multi-version patch: 3.3.0 - 3.17.3+ # # This patch causes a fixed value for font sharpness to be used in epub books, # instead of the value set by the advanced font sharpness/weight slider. The # slider sharpness values range from -0.4(min.) to 0.2(max.), default -0.0666. # This patch allows one of three fixed values: 0.0, 0.1, or 0.2. # # -kobo-font-sharpness: %1; --> -kobo-font-sharpness:0.0; # find_base_address = `\x10\0\0\0 \0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0s\0h\0` replace_string = 0030, `\x20\0%\01\0`, `0\0.\00\0` # # Replacement sharpness value: `0` = 0.0, `1` = 0.1, `2` = 0.2. replace_string = 0034, `0`, `2` </Patch>
khd-401	Enforce user line spacing in ePubs	This patch cannot be enabled if the `ePub fixed/adjustable top/bottom margins` patch is enabled. This patch causes the line spacing setting selected from the reading settings (Aa) menu to be applied at body and paragraph level, instead of just at body level. This will result in the user-selected line spacing setting taking effect in some books where it wouldn't before, but there will still be some books where it won't take effect (such as those where the publisher has used <div> instead of <p> for paragraphs), and some books where it does take effect when it shouldn't (such as those where the publisher has used <p> instead of <h1>, <h2>, etc. for headings). The only way to get perfect results is to edit the epub and fix the problems at source. libnickel.so.1.0.0<Patch> patch_name = `Enforce user line spacing in ePubs` patch_enable = `no` # # This patch cannot be enabled if the `ePub fixed/adjustable top/bottom margins` # patch is enabled. # # This patch causes the line spacing setting selected from the reading settings # (Aa) menu to be applied at body and paragraph level, instead of just at body # level. This will result in the user-selected line spacing setting taking # effect in some books where it wouldn't before, but there will still be some # books where it won't take effect (such as those where the publisher has used # <div> instead of <p> for paragraphs), and some books where it does take # effect when it shouldn't (such as those where the publisher has used <p> # instead of <h1>, <h2>, etc. for headings). The only way to get perfect # results is to edit the epub and fix the problems at source. # replace_string = B4C670, `\x20\0l\0i\0n\0e\0-\0h\0e\0i\0g\0h\0t\0:\0 \0%\01\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0\n\0`, `}\0b\0o\0d\0y\0,\0p\0{\0l\0i\0n\0e\0-\0h\0e\0i\0g\0h\0t\0:\0%\01\0!\0i\0m\0p\0o\0r\0t\0` replace_string = B4C6BC, `\x20\0p\0a\0d\0d\0i\0n\0g\0-\0b\0o\0t\0t\0o\0m\0:\0 \0%\01\0e\0m\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0\n\0`, `a\0n\0t\0}\0 \0b\0o\0d\0y\0 \0{\0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0\n\0` </Patch>
khd-400	Enforce user line spacing and justification in ePubs	This patch causes the line spacing AND justification settings selected from the reading settings (Aa) menu to be applied at body and paragraph level, instead of just at body level. This will result in the user-selected settings taking effect in some books where they wouldn't before, but there will still be some books where they won't take effect, and some books where they do take effect when they shouldn't. (The only way to get perfect results is to edit the epub and fix the problems at source.) libnickel.so.1.0.0<Patch> patch_name = `Enforce user line spacing and justification in ePubs` patch_enable = `no` # # This patch causes the line spacing AND justification settings selected from # the reading settings (Aa) menu to be applied at body and paragraph level, # instead of just at body level. This will result in the user-selected settings # taking effect in some books where they wouldn't before, but there will still # be some books where they won't take effect, and some books where they do take # effect when they shouldn't. (The only way to get perfect results is to edit # the epub and fix the problems at source.) # replace_string = B4C604, `b\0o\0d\0y\0 \0{\0\n\0`, `b\0o\0d\0y\0,\0p\0{\0` # # Comment out the following replace_string line if the # `ePub fixed/adjustable top/bottom margins` patch is enabled. # replace_string = B4C6BE, `p\0a\0d\0d\0i\0n\0g\0-\0b\0o\0t\0t\0o\0m\0:\0 \0%\01\0e\0m\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0\n\0`, `}\0 \0b\0o\0d\0y\0 \0{\0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0\n\0` </Patch>
khd-399	Force user line spacing in KePubs	This patch will allow the line spacing set by the slider to take effect in some problem KePub books with fixed linespacing (ones where the publisher has used <div> instead of <p> for pararaphs.) However it might also override some line spacing that would better be left fixed. libnickel.so.1.0.0<Patch> patch_name = `Force user line spacing in KePubs` patch_enable = `no` # Multi-version patch: 3.3.0 - 3.17.3+ # # This patch will allow the line spacing set by the slider to take effect # in some problem KePub books with fixed linespacing (ones where the publisher # has used <div> instead of <p> for pararaphs.) However it might also override # some line spacing that would better be left fixed. # # body, p { line-height: %1 ... } --> body,div,p{line-height:%1 ... } find_base_address = `b\0o\0d\0y\0,\0 \0p\0 \0{\0 \0l\0i\0n\0e\0-\0h\0e\0i\0g\0h\0t\0:\0 \0%` replace_string = 0000, `b\0o\0d\0y\0,\0 \0p\0 \0{\0 \0l\0i\0n\0e\0-\0h\0e\0i\0g\0h\0t\0:\0 \0%`, `b\0o\0d\0y\0,\0d\0i\0v\0,\0p\0{\0l\0i\0n\0e\0-\0h\0e\0i\0g\0h\0t\0:\0%` </Patch>
khd-398	KePub zero body margin/padding	This patch adds the following to the built-in KePub stylesheet: body{margin:0!important;padding:0!important} which solves the problem with the text of some KePubs being shifted to the right and cut off at the right margin in full-screen reading mode. libnickel.so.1.0.0<Patch> patch_name = `KePub zero body margin/padding` patch_enable = `no` # Multi-version patch: 3.12.0 - 3.17.3+ # # This patch adds the following to the built-in KePub stylesheet: # # body{margin:0!important;padding:0!important} # # which solves the problem with the text of some KePubs being shifted to the # right and cut off at the right margin in full-screen reading mode. # find_base_address = `\t\0.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0` # replace_string = 0000, `\t\0.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0 \0a\0 \0{\0 \0b\0o\0r\0d\0e\0r\0-\0r\0i\0g\0h\0t\0:\0 \01\0p\0x\0 \0s\0o\0l\0i\0d\0 \0b\0l\0a\0c\0k\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0 \0a\0{\0b\0o\0r\0d\0e\0r\0-\0r\0i\0g\0h\0t\0:\01\0p\0x\0 \0s\0o\0l\0i\0d\0 \0b\0l\0a\0c\0k\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0A\0u\0t\0h\0o\0r\0` # replace_string = 00BA, `.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0,\0 \0.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0 \0{\0 \0b\0o\0r\0d\0e\0r\0-\0r\0i\0g\0h\0t\0:\0 \02\0p\0x\0 \0d\0o\0t\0t\0e\0d\0 \0b\0l\0a\0c\0k\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0,\0.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0{\0b\0o\0r\0d\0e\0r\0-\0r\0i\0g\0h\0t\0:\02\0p\0x\0 \0d\0o\0t\0t\0e\0d\0 \0b\0l\0a\0c\0k\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0[\0w\0r\0i\0t\0` # replace_string = 01EA, `.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0,\0 \0.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0 \0{\0 \0b\0o\0r\0d\0e\0r\0-\0r\0i\0g\0h\0t\0:\0 \02\0p\0x\0 \0s\0o\0l\0i\0d\0 \0b\0l\0a\0c\0k\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0,\0.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0r\0l\0"\0]\0{\0b\0o\0r\0d\0e\0r\0-\0r\0i\0g\0h\0t\0:\02\0p\0x\0 \0s\0o\0l\0i\0d\0 \0b\0l\0a\0c\0k\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0` # replace_string = 0300, `.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0l\0r\0"\0]\0 \0a\0 \0{\0 \0b\0o\0r\0d\0e\0r\0-\0l\0e\0f\0t\0:\0 \01\0p\0x\0 \0s\0o\0l\0i\0d\0 \0b\0l\0a\0c\0k\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0l\0r\0"\0]\0 \0a\0{\0b\0o\0r\0d\0e\0r\0-\0l\0e\0f\0t\0:\01\0p\0x\0 \0s\0o\0l\0i\0d\0 \0b\0l\0a\0c\0k\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0` # replace_string = 03B6, `.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0l\0r\0"\0]\0,\0 \0.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0l\0r\0"\0]\0 \0{\0 \0b\0o\0r\0d\0e\0r\0-\0l\0e\0f\0t\0:\0 \02\0p\0x\0 \0d\0o\0t\0t\0e\0d\0 \0b\0l\0a\0c\0k\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `r\0t\0i\0c\0a\0l\0-\0l\0r\0"\0]\0,\0.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0v\0e\0r\0t\0i\0c\0a\0l\0-\0l\0r\0"\0]\0{\0b\0o\0r\0d\0e\0r\0-\0l\0e\0f\0t\0:\02\0p\0x\0 \0d\0o\0t\0t\0e\0d\0 \0b\0l\0a\0c\0k\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0b\0o\0d\0y\0{\0m\0a\0r\0g\0i\0n\0:\00\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0p\0a\0d\0d\0i\0n\0g\0:\00\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0` # # The body rule inserted above takes effect in normal reading mode too, which # interferes with another rule used to set the user margins in normal reading # mode. To prevent that happening, the following change is made to increase the # priority of the user margin setting rule: # # body { margin: 0px %1% 0px %2% ! important;}\n # --> html body{margin:0px %1% 0px %2%!important;}\n # find_base_address = `b\0o\0d\0y\0 \0{\0 \0m\0a\0r\0g\0i\0n\0:\0 \00\0p\0x\0 \0%\01\0%\0` # replace_string = 0000, `b\0o\0d\0y\0 \0{\0 \0m\0a\0r\0g\0i\0n\0:\0 \00\0p\0x\0 \0%\01\0%\0 \00\0p\0x\0 \0%\02\0%\0 \0!\0 \0i\0`, `h\0t\0m\0l\0 \0b\0o\0d\0y\0{\0m\0a\0r\0g\0i\0n\0:\00\0p\0x\0 \0%\01\0%\0 \00\0p\0x\0 \0%\02\0%\0!\0i\0` </Patch>
khd-397	Fix kepub side bearing font cut-off bug	In kepubs, characters with large side bearing values (such as italic f, J) can be cut off if they appear at the very end of a line. The problem occurs in normal reading mode when the margin adjustment slider is set to minimum and in full-screen mode at any margin slider setting. To fix it this patch adds one of the following lines to the built-in kepub stylesheet, depending on patch options chosen (first line is the default if no options are changed): body>div{padding-left:.2em!important;padding-right: .2em!important} body>div{padding-top: .2em!important;padding-bottom:.2em!important} body>div{padding: .2em .2em!important} body>* {padding-left:.2em!important;padding-right: .2em!important} body>* {padding-top: .2em!important;padding-bottom:.2em!important} body>* {padding: .2em .2em!important} There are two main types of kepub, each affected differently by this patch: Type 1: kepubs created by Kobo from epub2 books, or created by Calibre with a recent version of the KoboTouchExtended driver. Type 2: kepubs created by Kobo from epub3 books, or created by Calibre with an old version of the KoboTouchExtended driver. Type 1 kepubs work best with this patch, the only side effects should be slightly larger screen margins. Some Type 2 kepubs might suffer additional side effects such as extra horizontal or vertical space between elements. There is an option below (marked 1) where you can choose whether to fix the bug only for Type 1 kepubs (default) or for both types. There are also options below (marked 2) to make the patch suit kepubs with horizontal or vertical text directions, or both. The side effects for Type 2 kepubs will likely be worse if the option for both horizontal and vertical is chosen. libnickel.so.1.0.0<Patch> patch_name = `Fix kepub side bearing font cut-off bug` patch_enable = `no` # Multi-version patch: 3.16.0 - 3.17.3+ # # In kepubs, characters with large side bearing values (such as italic f, J) can # be cut off if they appear at the very end of a line. The problem occurs in # normal reading mode when the margin adjustment slider is set to minimum and # in full-screen mode at any margin slider setting. To fix it this patch adds # one of the following lines to the built-in kepub stylesheet, depending on # patch options chosen (first line is the default if no options are changed): # # body>div{padding-left:.2em!important;padding-right: .2em!important} # body>div{padding-top: .2em!important;padding-bottom:.2em!important} # body>div{padding: .2em .2em!important} # body>* {padding-left:.2em!important;padding-right: .2em!important} # body>* {padding-top: .2em!important;padding-bottom:.2em!important} # body>* {padding: .2em .2em!important} # # There are two main types of kepub, each affected differently by this patch: # # Type 1: kepubs created by Kobo from epub2 books, or created by Calibre with # a recent version of the KoboTouchExtended driver. # # Type 2: kepubs created by Kobo from epub3 books, or created by Calibre with # an old version of the KoboTouchExtended driver. # # Type 1 kepubs work best with this patch, the only side effects should be # slightly larger screen margins. Some Type 2 kepubs might suffer additional # side effects such as extra horizontal or vertical space between elements. # There is an option below (marked 1) where you can choose whether to # fix the bug only for Type 1 kepubs (default) or for both types. # # There are also options below (marked 2) to make the patch suit kepubs # with horizontal or vertical text directions, or both. The side effects for # Type 2 kepubs will likely be worse if the option for both horizontal and # vertical is chosen. # find_base_address = `.\0K\0B\0H\0i\0g\0h\0l\0i\0g\0h\0t\0i\0n\0g\0,\0 \0.\0K\0B\0S\0e\0a\0r\0c\0h\0R\0e\0s\0u\0l\0t\0 \0{\0 \0b\0a\0c\0k\0g\0r\0o\0u\0n\0d\0-\0c\0o\0l\0o\0r\0:\0 \0#\0C\06\0C\06\0C\06\0` # replace_string = 0000, `.\0K\0B\0H\0i\0g\0h\0l\0i\0g\0h\0t\0i\0n\0g\0,\0 \0.\0K\0B\0S\0e\0a\0r\0c\0h\0R\0e\0s\0u\0l\0t\0 \0{\0 \0b\0a\0c\0k\0g\0r\0o\0u\0n\0d\0-\0c\0o\0l\0o\0r\0:\0 \0#\0C\06\0C\06\0C\06\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `.\0K\0B\0H\0i\0g\0h\0l\0i\0g\0h\0t\0i\0n\0g\0,\0.\0K\0B\0S\0e\0a\0r\0c\0h\0R\0e\0s\0u\0l\0t\0{\0b\0a\0c\0k\0g\0r\0o\0u\0n\0d\0-\0c\0o\0l\0o\0r\0:\0#\0C\06\0C\06\0C\06\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0S\0t\0a\0c\0k\0K\0` # replace_string = 0098, `.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0,\0 \0.\0K\0B\0S\0e\0a\0r\0c\0h\0R\0e\0s\0u\0l\0t\0,\0 \0.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0,\0 \0.\0K\0B\0H\0i\0g\0h\0l\0i\0g\0h\0t\0i\0n\0g\0 \0,\0 \0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0{\0 \0f\0o\0n\0t\0-\0s\0i\0z\0e\0:\0 \01\00\00\0%\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0-\0w\0e\0b\0k\0i\0t\0-\0t\0e\0x\0t\0-\0c\0o\0m\0b\0i\0n\0e\0:\0 \0i\0n\0h\0e\0r\0i\0t\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `e\0y\0w\0o\0r\0d\0,\0.\0K\0B\0S\0e\0a\0r\0c\0h\0R\0e\0s\0u\0l\0t\0,\0.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0,\0.\0K\0B\0H\0i\0g\0h\0l\0i\0g\0h\0t\0i\0n\0g\0,\0 \0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0{\0f\0o\0n\0t\0-\0s\0i\0z\0e\0:\01\00\00\0%\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0-\0w\0e\0b\0k\0i\0t\0-\0t\0e\0x\0t\0-\0c\0o\0m\0b\0i\0n\0e\0:\0i\0n\0h\0e\0r\0i\0t\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0 \0a\0{\0c\0o\0l\0o\0r\0` # replace_string = 1D8, `.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0 \0a\0 \0{\0 \0c\0o\0l\0o\0r\0:\0 \0b\0l\0a\0c\0k\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `:\0b\0l\0a\0c\0k\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0,\0.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0` # replace_string = 0238, `.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0,\0 \0.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0 \0{\0 \0b\0a\0c\0k\0g\0r\0o\0u\0n\0d\0-\0c\0o\0l\0o\0r\0:\0 \0t\0r\0a\0n\0s\0p\0a\0r\0e\0n\0t\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0t\0e\0x\0t\0-\0d\0e\0c\0o\0r\0a\0t\0i\0o\0n\0:\0 \0n\0o\0n\0e\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0{\0b\0a\0c\0k\0g\0r\0o\0u\0n\0d\0-\0c\0o\0l\0o\0r\0:\0t\0r\0a\0n\0s\0p\0a\0r\0e\0n\0t\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0t\0e\0x\0t\0-\0d\0e\0c\0o\0r\0a\0t\0i\0o\0n\0:\0n\0o\0n\0e\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0h\0o\0r\0i\0z\0o\0n\0t\0a\0l\0-\0t\0b\0"\0` # replace_string = 033E, `.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0h\0o\0r\0i\0z\0o\0n\0t\0a\0l\0-\0t\0b\0"\0]\0 \0a\0 \0{\0 \0b\0o\0r\0d\0e\0r\0-\0b\0o\0t\0t\0o\0m\0:\0 \01\0p\0x\0 \0s\0o\0l\0i\0d\0 \0b\0l\0a\0c\0k\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `]\0 \0a\0{\0b\0o\0r\0d\0e\0r\0-\0b\0o\0t\0t\0o\0m\0:\01\0p\0x\0 \0s\0o\0l\0i\0d\0 \0b\0l\0a\0c\0k\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0h\0o\0r\0i\0z\0o\0n\0t\0a\0l\0-\0t\0b\0"\0]\0,\0.\0K\0` # replace_string = 03FC, `.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0h\0o\0r\0i\0z\0o\0n\0t\0a\0l\0-\0t\0b\0"\0]\0,\0 \0.\0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0h\0o\0r\0i\0z\0o\0n\0t\0a\0l\0-\0t\0b\0"\0]\0 \0{\0 \0b\0o\0r\0d\0e\0r\0-\0b\0o\0t\0t\0o\0m\0:\0 \02\0p\0x\0 \0d\0o\0t\0t\0e\0d\0 \0b\0l\0a\0c\0k\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0h\0o\0r\0i\0z\0o\0n\0t\0a\0l\0-\0t\0b\0"\0]\0{\0b\0o\0r\0d\0e\0r\0-\0b\0o\0t\0t\0o\0m\0:\02\0p\0x\0 \0d\0o\0t\0t\0e\0d\0 \0b\0l\0a\0c\0k\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0h\0o\0r\0i\0z\0o\0n\0t\0a\0l\0-\0t\0b\0"\0]\0,\0.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0` # replace_string = 0536, `.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0h\0o\0r\0i\0z\0o\0n\0t\0a\0l\0-\0t\0b\0"\0]\0,\0 \0.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0C\0o\0n\0t\0i\0n\0u\0e\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0h\0o\0r\0i\0z\0o\0n\0t\0a\0l\0-\0t\0b\0"\0]\0 \0{\0 \0b\0o\0r\0d\0e\0r\0-\0b\0o\0t\0t\0o\0m\0:\0 \02\0p\0x\0 \0s\0o\0l\0i\0d\0 \0b\0l\0a\0c\0k\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0`, `i\0n\0u\0e\0d\0[\0w\0r\0i\0t\0i\0n\0g\0M\0o\0d\0e\0=\0"\0h\0o\0r\0i\0z\0o\0n\0t\0a\0l\0-\0t\0b\0"\0]\0{\0b\0o\0r\0d\0e\0r\0-\0b\0o\0t\0t\0o\0m\0:\02\0p\0x\0 \0s\0o\0l\0i\0d\0 \0b\0l\0a\0c\0k\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0b\0o\0d\0y\0>\0d\0i\0v\0{\0p\0a\0d\0d\0i\0n\0g\0-\0l\0e\0f\0t\0:\0.\02\0e\0m\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0p\0a\0d\0d\0i\0n\0g\0-\0r\0i\0g\0h\0t\0:\0 \0.\02\0e\0m\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0 \0` # # Fix typo in annotations styles: KBAuthorAnnotation --> .KBAuthorAnnotation replace_string = 0102, `\x20`, `.` # # Choose padding size: 1 = 0.1em, 2 = 0.2em, etc. replace_string = 05FA, `2`, `2` replace_string = 0636, `2`, `2` # # # 1 Choose to fix bug for Type1 kepubs only, or both Type1 and Type2 kepubs. # Default fixes the bug for Type 1 kepubs and has no effect on type 2 kepubs. # # Uncomment the following replace_string line to fix the bug for both types, # but beware there can be undesirable side effects for some Type 2 kepubs: #replace_string = 05CC, `b\0o\0d\0y\0>\0d\0i\0v\0`, `b\0o\0d\0y\0>\0\0 \0 \0` # # # 2* Choose padding location to suit text direction of your kepubs. # Default is left/right padding (suits horizontal text directions only.) # # Either uncomment the following two replace_string lines for top/bottom # padding (suits vertical text directions only) ... #replace_string = 05EE, `l\0e\0f\0t\0:\0`, `t\0o\0p\0:\0 \0` #replace_string = 0626, `r\0i\0g\0h\0t\0:\0 \0`, `b\0o\0t\0t\0o\0m\0:\0` # # ... or else uncomment the following two replace_string lines for top/bottom # and left/right padding (suits both horizontal and vertical text directions, # but may have some undesirable side effects on the layout of Type 2 kepubs, # such as extra space between paragraphs.) #replace_string = 05EC, `-\0l\0e\0f\0t\0:\0`, `:\0 \0 \0 \0 \0 \0` #replace_string = 0600, `!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0p\0a\0d\0d\0i\0n\0g\0-\0r\0i\0g\0h\0t\0:\0`, `\x20\0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0` # </Patch>
khd-396	Set kepub hyphenation	The built-in kepub stylesheet has a line "* { -webkit-hyphens: auto; }" to turn on hyphenation, but it is only used if the device's justification button is set to full justification. With this patch enabled hyphenation will always/never be turned on, regardless of justification button setting. (Note that if the publisher has set the hyphenation in the book's stylesheet then that will override the built-in stylesheet.) libnickel.so.1.0.0<Patch> patch_name = `Set kepub hyphenation` patch_enable = `no` # # The built-in kepub stylesheet has a line "* { -webkit-hyphens: auto; }" # to turn on hyphenation, but it is only used if the device's justification # button is set to full justification. With this patch enabled hyphenation # will always/never be turned on, regardless of justification button setting. # # (Note that if the publisher has set the hyphenation in the book's stylesheet # then that will override the built-in stylesheet.) # # Alternative 1: Always turn kepub hyphenation on replace_bytes = 8DF0AA, 22 F7 48 E5, 01 20 01 20 # # Alternative 2: Never turn kepub hyphenation on #replace_bytes = 8DF0AA, 22 F7 48 E5, 00 20 00 20 </Patch>
khd-395	Custom Sleep/Power-off timeouts	libnickel.so.1.0.0<Patch> patch_name = `Custom Sleep/Power-off timeouts` patch_enable = `no` # Values displayed on both menus replace_string = C0B098, `5 mins\0`, `10 mins` replace_string = C0B0A0, `10 mins`, `20 mins` replace_string = C0B0A8, `15 mins`, `30 mins` replace_string = C0B0B0, `30 mins`, `1 hour` replace_string = C0B0B8, `45 mins`, `2 hours` replace_string = C0B0C0, `60 mins`, `4 hours` # Actual values used for sleep menu replace_int = 9550DA, 5, 10 replace_int = 955124, 10, 20 replace_int = 955168, 15, 30 replace_int = 9551AC, 30, 60 replace_int = 9551F0, 45, 120 replace_int = 955234, 60, 240 # Actual values used for power menu replace_int = 9552E8, 5, 10 replace_int = 95532C, 10, 20 replace_int = 95536E, 15, 30 replace_int = 9553AE, 30, 60 replace_int = 9553EE, 45, 120 replace_int = 95542C, 60, 240 </Patch>
khd-394	Custom footer	Changes the footer text with something shorter (not sure how it affects translations) libnickel.so.1.0.0<Patch> patch_name = `Custom footer` patch_enable = `no` # Multi-version patch: 2.8.1 - 3.17.3+ # # Changes the footer text with something shorter # (not sure how it affects translations) # find_base_address = `Page %1 <i>of</i> %2` replace_string = 0000, `Page %1 <i>of</i> %2`, `%1 / %2` </Patch>
khd-393	Remove white borders from homescreen tile book covers	libnickel.so.1.0.0<Patch> patch_name = `Remove white borders from homescreen tile book covers` patch_enable = `no` #PhoenixSmallRecentBookTile replace_string = BA7027, `coverBorder:4;`, `coverBorder:0;` replace_string = BA70BD, `coverBorder:4;`, `coverBorder:0;` #PocketRecentlyReadTile replace_string = BA7AC0, `coverBorder: 6;`, `coverBorder: 0;` replace_string = BA7B4B, `coverBorder: 4;`, `coverBorder: 0;` #RecentBookTile replace_string = BA89F0, `coverBorder:6;`, `coverBorder:0;` replace_string = BA8AB0, `coverBorder:6;`, `coverBorder:0;` replace_string = BA8B6C, `coverBorder:4;`, `coverBorder:0;` replace_string = BA8C28, `coverBorder:4;`, `coverBorder:0;` #SmallRecentBookTile replace_string = BA9FB1, `coverBorder:6;`, `coverBorder:0;` </Patch>
khd-392	Compact homepage layout (Aura only)	libnickel.so.1.0.0<Patch> patch_name = `Compact homepage layout (Aura only)` patch_enable = `no` #DragonHomePageView (Search bar height) replace_string = BA2838, `min-height:100px;`, `min-height:090px;` replace_string = BA284B, `max-height:100px;`, `max-height:090px;` #DragonHomePageView (Space below search bar) replace_string = BA290E, `min-height:15px;`, `min-height:02px;` replace_string = BA2920, `max-height:15px;`, `max-height:02px;` #MultiColumnTileView (Space between tiles) replace_string = BA2AF1, `horizontalSpacing:10;`, `horizontalSpacing:01;` replace_string = BA2B12, `verticalSpacing:10;`, `verticalSpacing:01;` #footer (Footer menu bar height) replace_string = BA2F3D, `min-height:90px;`, `min-height:78px;` replace_string = BA2F4F, `max-height:90px;`, `max-height:78px;` #PhoenixSmallRecentBookTile replace_string = BA6FE8, `percentFontSize:28;`, `percentFontSize:22;` replace_string = BA7007, `progressFontSize:22;`, `progressFontSize:22;` #RecentBookTile replace_string = BA8B02, `percentFontSize:28;`, `percentFontSize:22;` replace_string = BA8B27, `progressFontSize:22;`, `progressFontSize:22;` </Patch>
khd-391	Compact homepage layout (Glo only)	libnickel.so.1.0.0<Patch> patch_name = `Compact homepage layout (Glo only)` patch_enable = `no` #DragonHomePageView (Search bar height) replace_string = BA2838, `min-height:100px;`, `min-height:090px;` replace_string = BA284B, `max-height:100px;`, `max-height:090px;` #DragonHomePageView (Space below search bar) replace_string = BA290E, `min-height:15px;`, `min-height:06px;` replace_string = BA2920, `max-height:15px;`, `max-height:06px;` #MultiColumnTileView (Space between tiles) replace_string = BA2AF1, `horizontalSpacing:10;`, `horizontalSpacing:04;` replace_string = BA2B12, `verticalSpacing:10;`, `verticalSpacing:04;` #footer (Footer menu bar height) replace_string = BA2F3D, `min-height:90px;`, `min-height:78px;` replace_string = BA2F4F, `max-height:90px;`, `max-height:78px;` #PhoenixSmallRecentBookTile replace_string = BA6FE8, `percentFontSize:28;`, `percentFontSize:22;` replace_string = BA7007, `progressFontSize:22;`, `progressFontSize:22;` #RecentBookTile replace_string = BA8B02, `percentFontSize:28;`, `percentFontSize:22;` replace_string = BA8B27, `progressFontSize:22;`, `progressFontSize:22;` </Patch>
khd-390	Block WiFi firmware upgrade	This patch is untested. If it works then the firmware will not be upgraded during a WiFi sync, but you can still upgrade manually or by syncing with the Kobo desktop. WARNING: This patch could result in a boot loop when signing out of your Kobo account (Settings > Accounts > Sign out) or invoking a factory reset from the device information menu (Settings > Device information > Factory reset). Remove this patch before using either of those options. A factory reset invoked using the hardware methods (such as holding down the light button while switching on) should not be affected. libnickel.so.1.0.0<Patch> patch_name = `Block WiFi firmware upgrade` patch_enable = `no` # Multi-version patch: 3.3.0 - 3.17.3+ # # This patch is untested. If it works then the firmware will not be upgraded # during a WiFi sync, but you can still upgrade manually or by syncing with # the Kobo desktop. # # WARNING: This patch could result in a boot loop when signing out of your Kobo # account (Settings > Accounts > Sign out) or invoking a factory reset from the # device information menu (Settings > Device information > Factory reset). # Remove this patch before using either of those options. # A factory reset invoked using the hardware methods (such as holding down the # light button while switching on) should not be affected. # find_base_address = `U\0p\0g\0r\0a\0d\0e\0C\0h\0e\0c\0k\0/\0%\01\0/\0%\02\0/\0%\03\0/\0%\04\0/\0%\05\0` replace_string = 0026, `%\03\0/\0%\04\0/\0%\05\0`, `k\0/\09\09\0.\09\0/\05\0` </Patch>
khd-389	Custom kepub default margins	libnickel.so.1.0.0<Patch> patch_name = `Custom kepub default margins` patch_enable = `no` # Device = Glo/Aura, Type = pocket article or non-Japanese kepub replace_int = 58F07E, 25, 5 # Device = Glo/Aura, Type = Japanese kepub replace_int = 58F080, 45, 5 # Device = Other, Type = Any replace_int = 58F090, 20, 5 </Patch>
khd-388	Margins fine tuning	Do not enable this patch unless you're sure you need it. It may cause the screen to be off-centre. libnickel.so.1.0.0<Patch> patch_name = `Margins fine tuning` patch_enable = `no` # # Do not enable this patch unless you're sure you need it. # It may cause the screen to be off-centre. # # Initial replaces replace_bytes = 8DB694, 19 46, 00 21 replace_bytes = 8DB698, 1A 46, 00 22 # Values for replace # Left margin replace_int = 8DB694, 0, 10 # Top margin replace_int = 8DB698, 0, 10 </Patch>
khd-387	Customise PinchGestureRecognizer	libnickel.so.1.0.0<Patch> patch_name = `Customise PinchGestureRecognizer` patch_enable = `no` # PinchGestureRecognizer::StationaryTolerance replace_float = B723C0, 5.0, 5.0 # PinchGestureRecognizer::UpdateTolerance replace_float = B723C8, 10.0, 10.0 # PinchGestureRecognizer::TriggerTolerance replace_float = B723D0, 30.0, 30.0 </Patch>
khd-386	Turkish keyboard	libnickel.so.1.0.0<Patch> patch_name = `Turkish keyboard` patch_enable = `no` # Enable uppercase for `ß` key replace_bytes = 810508, 00 24, 01 24 # Replace layout sign find_base_address = `ÉÀÇ` replace_string = 0000, `ÉÀÇ`, `EN/TR` # Change keyboard layout find_base_address = `æ\0\0à\0\0è\0\0ì\0\0` # Second row, left to right: # (for Touch/Mini/Glo/Aura the first key moves to top row, first column.) replace_string = 0000, `æ\0`, `!` replace_string = 0004, `à\0`, `q` replace_string = 0008, `è\0`, `w` replace_string = 000C, `ì\0`, `e` replace_string = 0010, `ò\0`, `r` replace_string = 0014, `ù\0`, `t` replace_string = 0018, `á\0`, `y` replace_string = 001C, `é\0`, `u` replace_string = 0020, `í\0`, `ı` replace_string = 0024, `ó\0`, `o` replace_string = 0028, `ú\0`, `p` replace_string = 002C, `ý\0`, `ü` # Third row, left to right: # (for Touch/Mini/Glo/Aura the first key moves to top row, second column.) replace_string = 0030, `œ\0`, `’` replace_string = 0034, `â\0`, `a` replace_string = 0038, `ê\0`, `s` replace_string = 003C, `î\0`, `d` replace_string = 0040, `ô\0`, `f` replace_string = 0044, `û\0`, `g` replace_string = 0048, `ä\0`, `h` replace_string = 004C, `ë\0`, `j` replace_string = 0050, `ï\0`, `k` replace_string = 0054, `ö\0`, `l` replace_string = 0058, `ü\0`, `ş` replace_string = 005C, `ÿ\0`, `ğ` # Bottom row, left to right: replace_string = 0060, `ã\0`, `z` replace_string = 0064, `ñ\0`, `x` replace_string = 0068, `õ\0`, `c` replace_string = 006C, `å\0`, `v` replace_string = 0070, `ß\0`, `b` replace_string = 0074, `ç\0`, `n` replace_string = 0078, `đ\0`, `m` replace_string = 007C, `ø\0`, `ö` replace_string = 0080, `ĳ\0`, `ç` replace_string = 0084, `ł\0`, `i` # # Top row: Extra keys for Touch/Mini/Glo/Aura only. # (This patch cannot change the top row of the AuraHD/H2O/GloHD keypad.) find_base_address = `ƒ\0\0þ\0\0š\0\0ž\0\0` # Top row: columns 1-2 (see first key of second/third rows above.) # Top row: columns 3-5 replace_string = 0004, `þ\0`, `?` replace_string = 0008, `š\0`, `”` replace_string = 000C, `ž\0`, `-` # Top row: column 6 is a duplicate of the last key on the bottom row. # Top row: columns 7-10 replace_string = 0000, `ƒ\0`, `:` replace_string = 0010, `μ\0`, `;` replace_string = 0014, `ª\0`, `,` replace_string = 0018, `º\0`, `.` </Patch>
khd-385	Hebrew keyboard	libnickel.so.1.0.0<Patch> patch_name = `Hebrew keyboard` patch_enable = `no` # Multi-version patch: 3.8.0 - 3.17.0+ # # Replace layout sign find_base_address = `ÉÀÇ` replace_string = 0000, `ÉÀÇ`, `אב` # Change keyboard layout find_base_address = `æ\0\0à\0\0è\0\0ì\0\0` # Second row, left to right: # (for Touch/Mini/Glo/Aura the first key moves to top row, first column.) replace_string = 0000, `æ\0`, `@` replace_string = 0004, `à\0`, `'` replace_string = 0008, `è\0`, `/` replace_string = 000C, `ì\0`, `ק` replace_string = 0010, `ò\0`, `ר` replace_string = 0014, `ù\0`, `א` replace_string = 0018, `á\0`, `ט` replace_string = 001C, `é\0`, `ו` replace_string = 0020, `í\0`, `ן` replace_string = 0024, `ó\0`, `ם` replace_string = 0028, `ú\0`, `פ` replace_string = 002C, `ý\0`, `-` # Third row, left to right: # (for Touch/Mini/Glo/Aura the first key moves to top row, second column.) replace_string = 0030, `œ\0`, `,` replace_string = 0034, `â\0`, `ש` replace_string = 0038, `ê\0`, `ד` replace_string = 003C, `î\0`, `ג` replace_string = 0040, `ô\0`, `כ` replace_string = 0044, `û\0`, `ע` replace_string = 0048, `ä\0`, `י` replace_string = 004C, `ë\0`, `ח` replace_string = 0050, `ï\0`, `ל` replace_string = 0054, `ö\0`, `ך` replace_string = 0058, `ü\0`, `ף` replace_string = 005C, `ÿ\0`, `_` # Bottom row, left to right: replace_string = 0060, `ã\0`, `ז` replace_string = 0064, `ñ\0`, `ס` replace_string = 0068, `õ\0`, `ב` replace_string = 006C, `å\0`, `ה` replace_string = 0070, `ß\0`, `נ` replace_string = 0074, `ç\0`, `מ` replace_string = 0078, `đ\0`, `צ` replace_string = 007C, `ø\0`, `ת` replace_string = 0080, `ĳ\0`, `ץ` replace_string = 0084, `ł\0`, `.` # # Top row: Extra keys for Touch/Mini/Glo/Aura only. # (This patch cannot change the top row of the AuraHD/H2O/GloHD keypad.) find_base_address = `ƒ\0\0þ\0\0š\0\0ž\0\0` # Top row: columns 1-2 (see first key of second/third rows above.) # Top row: columns 3-5 replace_string = 0004, `þ\0`, `!` replace_string = 0008, `š\0`, `"` replace_string = 000C, `ž\0`, `?` # Top row: column 6 is a duplicate of the last key on the bottom row. # Top row: columns 7-10 replace_string = 0000, `ƒ\0`, `:` replace_string = 0010, `μ\0`, `)` replace_string = 0014, `ª\0`, `(` replace_string = 0018, `º\0`, `;` </Patch>
khd-384	Arabic keyboard	libnickel.so.1.0.0<Patch> patch_name = `Arabic keyboard` patch_enable = `no` # Multi-version patch: 3.8.0 - 3.17.3+ # # Replace layout sign find_base_address = `ÉÀÇ` replace_string = 0000, `ÉÀÇ`, `ع` # Change keyboard layout find_base_address = `æ\0\0à\0\0è\0\0ì\0\0` # Second row, left to right: # (for Touch/Mini/Glo/Aura the first key moves to top row, first column.) replace_string = 0000, `æ\0`, `ذ` replace_string = 0004, `à\0`, `ص` replace_string = 0008, `è\0`, `ث` replace_string = 000C, `ì\0`, `ق` replace_string = 0010, `ò\0`, `ف` replace_string = 0014, `ù\0`, `غ` replace_string = 0018, `á\0`, `ع` replace_string = 001C, `é\0`, `ه` replace_string = 0020, `í\0`, `خ` replace_string = 0024, `ó\0`, `ح` replace_string = 0028, `ú\0`, `ج` replace_string = 002C, `ý\0`, `د` # Third row, left to right: # (for Touch/Mini/Glo/Aura the first key moves to top row, second column.) replace_string = 0030, `œ\0`, `ض` replace_string = 0034, `â\0`, `ش` replace_string = 0038, `ê\0`, `س` replace_string = 003C, `î\0`, `ي` replace_string = 0040, `ô\0`, `ب` replace_string = 0044, `û\0`, `ل` replace_string = 0048, `ä\0`, `ا` replace_string = 004C, `ë\0`, `ت` replace_string = 0050, `ï\0`, `ن` replace_string = 0054, `ö\0`, `م` replace_string = 0058, `ü\0`, `ك` replace_string = 005C, `ÿ\0`, `ط` # Bottom row, left to right: replace_string = 0060, `ã\0`, `ئ` replace_string = 0064, `ñ\0`, `ء` replace_string = 0068, `õ\0`, `ؤ` replace_string = 006C, `å\0`, `ر` replace_string = 0070, `ß\0`, `ى` replace_string = 0074, `ç\0`, `ة` replace_string = 0078, `đ\0`, `و` replace_string = 007C, `ø\0`, `ز` replace_string = 0080, `ĳ\0`, `ظ` replace_string = 0084, `ł\0`, `.` # # Top row: Extra keys for Touch/Mini/Glo/Aura only. # (This patch cannot change the top row of the AuraHD/H2O/GloHD keypad.) find_base_address = `ƒ\0\0þ\0\0š\0\0ž\0\0` # Top row: columns 1-2 (see first key of second/third rows above.) # Top row: columns 3-5 replace_string = 0004, `þ\0`, `أ` replace_string = 0008, `š\0`, `إ` replace_string = 000C, `ž\0`, `آ` # Top row: column 6 is a duplicate of the last key on the bottom row. # Top row: columns 7-10 replace_string = 0000, `ƒ\0`, `,` replace_string = 0010, `μ\0`, `(` replace_string = 0014, `ª\0`, `)` replace_string = 0018, `º\0`, `-` </Patch>
khd-383	Cyrillic keyboard	libnickel.so.1.0.0<Patch> patch_name = `Cyrillic keyboard` patch_enable = `no` # Enable uppercase for `ß` key replace_bytes = 810508, 00 24, 01 24 # Replace layout sign find_base_address = `ÉÀÇ` replace_string = 0000, `ÉÀÇ`, `абв` # Change keyboard layout find_base_address = `æ\0\0à\0\0è\0\0ì\0\0` # Second row, left to right: # (for Touch/Mini/Glo/Aura the first key moves to top row, first column.) replace_string = 0000, `æ\0`, `й` replace_string = 0004, `à\0`, `ц` replace_string = 0008, `è\0`, `у` replace_string = 000C, `ì\0`, `к` replace_string = 0010, `ò\0`, `е` replace_string = 0014, `ù\0`, `н` replace_string = 0018, `á\0`, `г` replace_string = 001C, `é\0`, `ш` replace_string = 0020, `í\0`, `щ` replace_string = 0024, `ó\0`, `з` replace_string = 0028, `ú\0`, `х` replace_string = 002C, `ý\0`, `ъ` # Third row, left to right: # (for Touch/Mini/Glo/Aura the first key moves to top row, second column.) replace_string = 0030, `œ\0`, `ф` replace_string = 0034, `â\0`, `ы` replace_string = 0038, `ê\0`, `в` replace_string = 003C, `î\0`, `а` replace_string = 0040, `ô\0`, `п` replace_string = 0044, `û\0`, `р` replace_string = 0048, `ä\0`, `о` replace_string = 004C, `ë\0`, `л` replace_string = 0050, `ï\0`, `д` replace_string = 0054, `ö\0`, `ж` replace_string = 0058, `ü\0`, `э` replace_string = 005C, `ÿ\0`, `ё` # Bottom row, left to right: replace_string = 0060, `ã\0`, `я` replace_string = 0064, `ñ\0`, `ч` replace_string = 0068, `õ\0`, `с` replace_string = 006C, `å\0`, `м` replace_string = 0070, `ß\0`, `и` replace_string = 0074, `ç\0`, `т` replace_string = 0078, `đ\0`, `ь` replace_string = 007C, `ø\0`, `б` replace_string = 0080, `ĳ\0`, `ю` replace_string = 0084, `ł\0`, `.` # # Top row: Extra keys for Touch/Mini/Glo/Aura only. # (This patch cannot change the top row of the AuraHD/H2O/GloHD keypad.) find_base_address = `ƒ\0\0þ\0\0š\0\0ž\0\0` # Top row: columns 1-2 (see first key of second/third rows above.) # Top row: columns 3-5 replace_string = 0004, `þ\0`, `!` replace_string = 0008, `š\0`, `"` replace_string = 000C, `ž\0`, `?` # Top row: column 6 is a duplicate of the last key on the bottom row. # Top row: columns 7-10 replace_string = 0000, `ƒ\0`, `,` replace_string = 0010, `μ\0`, `(` replace_string = 0014, `ª\0`, `)` replace_string = 0018, `º\0`, `-` </Patch>
khd-382	Remove non-system fonts in Reader list	Removes Gothic, Ryumin, OpenDyslexic. BEWARE: Also removes most other sideloaded fonts. libnickel.so.1.0.0<Patch> patch_name = `Remove non-system fonts in Reader list` patch_enable = `no` # # Removes Gothic, Ryumin, OpenDyslexic. # BEWARE: Also removes most other sideloaded fonts. # replace_bytes = 8899CA, 64 F7 20 E1, 00 46 00 46 </Patch>
khd-381	Remove system fonts in Reader list	Removes Amasis, Avenir, Caecilia, Georgia, Gill Sans, Kobo Nickel, Malabar. BEWARE: Also removes sideloaded Delima, Felbridge, Rockwell, Times New Roman. libnickel.so.1.0.0<Patch> patch_name = `Remove system fonts in Reader list` patch_enable = `no` # # Removes Amasis, Avenir, Caecilia, Georgia, Gill Sans, Kobo Nickel, Malabar. # BEWARE: Also removes sideloaded Delima, Felbridge, Rockwell, Times New Roman. # replace_bytes = 88999C, 64 F7 36 E1, 00 46 00 46 </Patch>
khd-380	Custom page refresh options (1,2,4,8,16,32,64)	libnickel.so.1.0.0<Patch> patch_name = `Custom page refresh options (1,2,4,8,16,32,64)` patch_enable = `no` # # cmp r5, #7; bne.n; --> cmp r5, #6; bls.n; replace_bytes = 760E88, 07 2D 9A D1, 06 2D 9A D9 # # Replacement: Base (use this value for the first menu option): replace_int = 760DB8, 1, 1 # Double to get each successive menu option: replace_bytes = 760E86, 01 35, 6D 00 # Replacement: Maxmium (stop adding options when this value is exceeded): replace_int = 760E88, 6, 64 </Patch>
khd-379	Custom page refresh options (1,2,3,...,12)	libnickel.so.1.0.0<Patch> patch_name = `Custom page refresh options (1,2,3,...,12)` patch_enable = `no` # # cmp r5, #7; bne.n; --> cmp r5, #6; bls.n; replace_bytes = 760E88, 07 2D 9A D1, 06 2D 9A D9 # # Replacement: Base (use this value for the first menu option): replace_int = 760DB8, 1, 1 # Replacement: Increment (add this value to get each successive menu option): replace_int = 760E86, 1, 1 # Replacement: Maxmium (stop adding options when this value is exceeded): replace_int = 760E88, 6, 12 </Patch>
khd-378	ePub fixed/adjustable top/bottom margins	This patch sets the @page margin sizes in epubs, overriding any @page margin set in the book's stylesheet. By default the top and bottom margins are set to be adjustable, their size similar to the left/right margin size set by the adjustment slider. There are options to set the top and/or bottom margin to a fixed size instead. Note that this patch has the side-effect of removing the body bottom padding from the built-in stylesheet, which means that there will no longer be a line of padding added automatically at the end of chapters. libnickel.so.1.0.0<Patch> patch_name = `ePub fixed/adjustable top/bottom margins` patch_enable = `no` # # This patch sets the @page margin sizes in epubs, overriding any @page margin # set in the book's stylesheet. # # By default the top and bottom margins are set to be adjustable, their size # similar to the left/right margin size set by the adjustment slider. There # are options to set the top and/or bottom margin to a fixed size instead. # # Note that this patch has the side-effect of removing the body bottom padding # from the built-in stylesheet, which means that there will no longer be a line # of padding added automatically at the end of chapters. # # getReadingLineHeight(...) --> getReadingLeftMargin(...) replace_bytes = 459858, B6 F7 B8 EE, 9A F7 14 EE # QString.arg(double, ...) --> QString.arg(int64, ...) replace_bytes = 45985C, 20 22 4F F0 FF 33, 20 21 01 22 0A 23 replace_bytes = 459866, AD F8 04 20 00 93, 02 91 42 43 01 93 replace_bytes = 459870, 00 22 67 23 A5 F7 80 E9, 00 23 00 93 9A F7 DA E9 # padding-bottom: %1em !important;\n # --> }@page{margin:%1px 0 %1px 0}body{ replace_string = B4C6BE, `p\0a\0d\0d\0i\0n\0g\0-\0b\0o\0t\0t\0o\0m\0:\0 \0%\01\0e\0m\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0\n\0`, `}\0@\0p\0a\0g\0e\0{\0m\0a\0r\0g\0i\0n\0:\0%\01\0p\0x\0 \00\0 \0%\01\0p\0x\0 \00\0}\0b\0o\0d\0y\0{\0` # # Optional replacement value: Uncomment for a FIXED TOP MARGIN size in px, # default 25px. Replacement value is margin size, two digits separated by \0 # (Leave commented out for an adjustable top margin.) #replace_string = B4C6DA, `%\01`, `2\05` # # Optional replacement value: Uncomment for a FIXED BOTTOM MARGIN size in px, # default 00px. Replacement value is margin size, two digits separated by \0 # (Leave commented out for an adjustable bottom margin.) #replace_string = B4C6E8, `%\01`, `0\00` # # Replacement value: Sets the value of the ADJUSTABLE top/bottom margin (if any) # to a multiple of readingLeftMargin, in pixels. Suggested values are: # Normal reading mode: 5px (Touch/Mini), 6px (Glo/Aura), 8px (AuraHD/H2O/GloHD) # Full-screen mode: 6px (Touch/Mini), 7px (Glo/Aura), 10px (AuraHD/H2O/GloHD) replace_int = 45985E, 1, 6 </Patch>
khd-377	Allow download all in Browser	libnickel.so.1.0.0<Patch> patch_name = `Allow download all in Browser` patch_enable = `no` replace_bytes = 79366C, 78 F4 48 E8, 01 20 01 20 </Patch>
khd-376	Freedom to advanced fonts control	This patch allows the advanced font options (weight/sharpness adjustments) to work with sideloaded fonts too. (KEPUB: OTF and TTF. EPUB: TTF only.) WARNING: IT IS NOT SAFE TO ENABLE THIS PATCH IF YOUR DEVICE IS SET TO A JAPANESE LOCALE OR JAPANESE BOOKS ARE OPENED. libnickel.so.1.0.0<Patch> patch_name = `Freedom to advanced fonts control` patch_enable = `no` # # This patch allows the advanced font options (weight/sharpness adjustments) # to work with sideloaded fonts too. (KEPUB: OTF and TTF. EPUB: TTF only.) # # WARNING: IT IS NOT SAFE TO ENABLE THIS PATCH IF YOUR DEVICE IS SET TO A # JAPANESE LOCALE OR JAPANESE BOOKS ARE OPENED. # # VolumeManager.isJapanese(a) --> False replace_bytes = 5E57FC, 06 F6 EC E9, 00 20 00 20 # N3FontTypeUtil.setupMonotypeDropdown(b,c) # --> N3FontTypeUtil.setupDropdown(UNDEFINED,b,c) replace_bytes = 75B916, 58 46 51 46, 59 46 52 46 replace_bytes = 75B91A, 88 F4 FE EB, 9E F4 3C EB # N3FontTypeController.setupAdvancedOption --> NOP replace_bytes = 886A92, 86 F7 9E E7, 00 46 00 46 replace_bytes = 8879DC, 85 F7 F8 E7, 00 46 00 46 </Patch>
khd-375	Search in Library by default	libnickel.so.1.0.0<Patch> patch_name = `Search in Library by default` patch_enable = `yes` # SearchEditBox.setSearchType(0) --> SearchEditBox.setSearchType(1) replace_bytes = 912B80, 41 46, 01 21 </Patch>
khd-374	Brightness fine control	libnickel.so.1.0.0<Patch> patch_name = `Brightness fine control` patch_enable = `yes` replace_int = 8622BA, 10, 01 replace_int = 8622EA, 10, 01 </Patch>
khd-373	Custom font sizes	Unpatched font sizes now depend on the device's screen resolution: GloHD: 14px - 150px (48 sizes) AuraHD/H2O: 12px - 150px (50 sizes) Glo/Aura: 12px - 122px (43 sizes) Touch/Mini: 12px - 90px (35 sizes) Unpatched sizes increase in steps of 1 from the smallest size up to size 22, then in steps of 2 up to size 50, then in steps of 4 up to the largest size. I don't know how many sizes are allowed, but it is probably safe to use 50. The example replacement values in this patch result in the following ranges, with increases in steps of 1 from the smallest size up to size 48, then steps of 2 up to size 60, then steps of 4 up to the largest size: GloHD: 14px - 88px (48 sizes) AuraHD/H2O: 12px - 88px (50 sizes) Glo/Aura: 12px - 80px (48 sizes) Touch/Mini: 12px - 80px (48 sizes) libnickel.so.1.0.0<Patch> patch_name = `Custom font sizes` patch_enable = `no` # # Unpatched font sizes now depend on the device's screen resolution: # # GloHD: 14px - 150px (48 sizes) # AuraHD/H2O: 12px - 150px (50 sizes) # Glo/Aura: 12px - 122px (43 sizes) # Touch/Mini: 12px - 90px (35 sizes) # # Unpatched sizes increase in steps of 1 from the smallest size up to size 22, # then in steps of 2 up to size 50, then in steps of 4 up to the largest size. # # I don't know how many sizes are allowed, but it is probably safe to use 50. # # The example replacement values in this patch result in the following ranges, # with increases in steps of 1 from the smallest size up to size 48, then # steps of 2 up to size 60, then steps of 4 up to the largest size: # # GloHD: 14px - 88px (48 sizes) # AuraHD/H2O: 12px - 88px (50 sizes) # Glo/Aura: 12px - 80px (48 sizes) # Touch/Mini: 12px - 80px (48 sizes) # # Start with this font size: (GloHD, Others) replace_int = 888EF6, 14, 14 replace_int = 888EFA, 12, 12 # # Add font sizes in increments of 1 until this size exceeded: replace_int = 888F2C, 21, 47 # # Continue from this font size: replace_int = 888F32, 22, 48 # # Add font sizes in increments of 2 until this size exceeded: replace_int = 888FC0, 49, 59 replace_int = 888FDC, 49, 59 # # Continue from this font size: replace_int = 888FE2, 50, 60 # # Add font sizes in increments of 4 until this size exceeded: # (GloHD/AuraHD/H2O, Glo/Aura, Touch/Mini) replace_int = 888F06, 150, 88 replace_int = 889052, 122, 80 replace_int = 889056, 90, 80 </Patch>
khd-372	Custom left & right margins	libnickel.so.1.0.0<Patch> patch_name = `Custom left & right margins` patch_enable = `yes` # Multi-version patch: 2.8.1 - 3.17.3+ find_base_address = `\0\0\0\0\x02\0\0\0\x04\0\0\0\x06\0\0\0\x08\0\0\0\x0A\0\0\0\x0C\0\0\0\x0E\0\0\0\x10\0\0\0` # 9 values for replacement: replace_int = 0000, 00, 00 replace_int = 0004, 02, 01 replace_int = 0008, 04, 02 replace_int = 000C, 06, 03 replace_int = 0010, 08, 04 replace_int = 0014, 10, 05 replace_int = 0018, 12, 06 replace_int = 001C, 14, 07 replace_int = 0020, 16, 08 </Patch>
khd-371	My 15 line spacing values	libnickel.so.1.0.0<Patch> patch_name = `My 15 line spacing values` patch_enable = `yes` # load val1 from new table replace_bytes = 5E80CC, 00 23 00 22 C3 F6 F0 73, 00 46 40 A3 D3 E9 00 23 # load val5 from new table replace_bytes = 5E8124, 43 F2 33 33 4F F0 33 32, 2C A3 D3 E9 00 23 00 46 replace_bytes = 5E812C, C3 F6 F3 73, 00 46 00 46 # load val7 from new table replace_bytes = 5E8152, 00 23 00 22 C3 F6 F8 73, 00 46 22 A3 D3 E9 00 23 # load val10 from new table replace_bytes = 5E8190, 00 22 4F F0 80 43, 15 A3 D3 E9 00 23 # load val11-val14 from old table in a loop to make room for new table replace_bytes = 5E81A4, 48 A3 D3 E9 00 23 07 F1, 48 A7 00 26 D7 E9 00 23 replace_bytes = 5E81AC, 80 01 20 46 61 E9 0A 23, 20 A9 31 44 61 E9 0A 23 replace_bytes = 5E81B4, 11 F6 5C EF 45 A3 D3 E9, 20 46 11 F6 5C EF 08 36 replace_bytes = 5E81BC, 00 23 07 F1 80 01 20 46, 08 37 20 2E F2 D1 00 AF # load val15 from new table, jump over new table replace_bytes = 5E81C4, 61 E9 08 23 11 F6 52 EF, 0A A3 D3 E9 00 23 17 E0 # new table, inial values 1.0, 1.2, 1.5, 2.0, 3.0 replace_bytes = 5E81D0, 00 23 07 F1 80 01 20 46, 00 00 00 00 00 00 F0 3F replace_bytes = 5E81D8, 61 E9 06 23 11 F6 48 EF, 33 33 33 33 33 33 F3 3F replace_bytes = 5E81E0, 3F A3 D3 E9 00 23 07 F1, 00 00 00 00 00 00 F8 3F replace_bytes = 5E81E8, 80 01 20 46 61 E9 04 23, 00 00 00 00 00 00 00 40 replace_bytes = 5E81F0, 11 F6 3E EF 00 23 00 22, 00 00 00 00 00 00 08 40 # # 15 values for replacement: replace_float = 5E81D0, 1.0, 0.7 replace_float = 5E8298, 1.05, 0.75 replace_float = 5E82A0, 1.07, 0.8 replace_float = 5E82A8, 1.1, 0.82 replace_float = 5E81D8, 1.2, 0.84 replace_float = 5E82B0, 1.35, 0.86 replace_float = 5E81E0, 1.5, 0.88 replace_float = 5E82B8, 1.7, 0.9 replace_float = 5E82C0, 1.8, 0.92 replace_float = 5E81E8, 2.0, 0.94 replace_float = 5E82C8, 2.2, 0.96 replace_float = 5E82D0, 2.4, 0.98 replace_float = 5E82D8, 2.6, 1.0 replace_float = 5E82E0, 2.8, 1.05 replace_float = 5E81F0, 3.0, 1.1 # # The 15 line spacing values above should allow the line spacing to be adjusted # in increments of one pixel when using a medium sized font on a high resolution # device. If you use a small font size and/or a lower resolution device you may # find that increasing the slider one step at a time doesn't always result in a # line spacing change at each step. In that case, you might want to use 15 # replacement values that are not quite so close together. For example: # 0.7 0.75 0.8 0.825 0.85 0.875 0.9 0.925 0.95 0.975 1.0 1.05 1.1 1.15 1.2 # </Patch>
khd-370	My 10 line spacing values	libnickel.so.1.0.0<Patch> patch_name = `My 10 line spacing values` patch_enable = `no` replace_bytes = 5E80E4, 11 F6 C4 EF, 00 46 00 46 replace_bytes = 5E813A, 11 F6 9A EF, 00 46 00 46 replace_bytes = 5E8164, 11 F6 84 EF, 00 46 00 46 replace_bytes = 5E81A0, 11 F6 66 EF, 00 46 00 46 replace_bytes = 5E8206, 11 F6 34 EF, 00 46 00 46 # # 10 values for replacement replace_float = 5E8298, 1.05, 0.75 replace_float = 5E82A0, 1.07, 0.8 replace_float = 5E82A8, 1.1, 0.84 replace_float = 5E82B0, 1.35, 0.86 replace_float = 5E82B8, 1.7, 0.88 replace_float = 5E82C0, 1.8, 0.9 replace_float = 5E82C8, 2.2, 0.92 replace_float = 5E82D0, 2.4, 0.94 replace_float = 5E82D8, 2.6, 0.96 replace_float = 5E82E0, 2.8, 1.0 </Patch>
khd-369	Custom reading footer style	This patch customises the following properties of the reading footer: * Footer height (the amount of the screen reserved for the footer.) * Caption font size (Caption = page number or other progress indicator) * Caption top margin, which changes its vertical position within the footer. When editing the replacement values below, BE CAREFUL NOT TO CHANGE THE LENGTH OF THE REPLACEMENT STRING! If a replacement string is too long you will get an error when making the patch, but if one is too short then there will be no error, but strange things will happen to the reading footer. libnickel.so.1.0.0<Patch> patch_name = `Custom reading footer style` patch_enable = `no` # Multi-version patch: 3.15.0 - 3.17.3+ # # This patch customises the following properties of the reading footer: # # * Footer height (the amount of the screen reserved for the footer.) # * Caption font size (Caption = page number or other progress indicator) # * Caption top margin, which changes its vertical position within the footer. # # When editing the replacement values below, BE CAREFUL NOT TO CHANGE THE LENGTH # OF THE REPLACEMENT STRING! If a replacement string is too long you will get # an error when making the patch, but if one is too short then there will be no # error, but strange things will happen to the reading footer. # find_base_address = `ReadingFooter {\n\tmin-height: 70px;` # # Replacement footer height values: Touch/Mini replace_string = 0011, `min-height: 70px;`, `min-height: 32px;` replace_string = 0024, `max-height: 70px;`, `max-height: 32px;` # Replacement footer height values: Glo/Aura replace_string = 0085, `min-height: 82px;`, `min-height: 40px;` replace_string = 0098, `max-height: 82px;`, `max-height: 40px;` # Replacement footer height values: AuraHD/H2O/GloHD replace_string = 00DA, `min-height: 120px;`, `min-height: 052px;` replace_string = 00EE, `max-height: 120px;`, `max-height: 052px;` # # find_base_address = `#caption {\n\tfont-size: 16px;` Replace_string = 0000, `#caption {\n\tfont-size: 16px;\n}\n\n#caption[qApp_deviceIsPhoenix="true"] {\n\tfont-size: 20px;\n}\n\n#caption[qApp_deviceIsDragon="true"] {\n\tfont-size: 26px;\n}\n\n#caption[qApp_deviceIsAlyssum="true"] {\n\tfont-size: 30px;\n}\n\n#caption[qApp_localeName="ja_JP"] {\n\tfont-family: Sans-SerifJP;\n}`, `#caption {font-size: 16px;margin-top: 00px;}\n#caption[qApp_deviceIsPhoenix="true"] {font-size: 20px;}\n#caption[qApp_deviceIsDragon="true"] {font-size: 26px;}\n#caption[qApp_deviceIsAlyssum="true"] {font-size: 30px;}\n#caption[qApp_localeName="ja_JP"] {font-family: Sans-SerifJP;}` # # Replacement caption font size value for Touch/Mini: replace_string = 000A, `font-size: 16px;`, `font-size: 16px;` # Replacement caption font size value for Glo/Aura: replace_string = 0054, `font-size: 20px;`, `font-size: 20px;` # Replacement caption font size value for AuraHD/H2O: replace_string = 008C, `font-size: 26px;`, `font-size: 26px;` # Replacement caption font size value for GloHD: replace_string = 00C5, `font-size: 30px;`, `font-size: 30px;` # # Replacement caption top margin value for all devices: # (A negative top margin moves the caption text upwards, # further from the bezel and closer to the page content.) replace_string = 001A, `margin-top: 00px;`, `margin-top:-10px;` # # Uncomment to use a fixed replacement caption font family, for all devices: # (You can change Avenir to another font name of your choice, but Avenir or # Georgia are recommended because other fonts may not be loaded when the book # is first opened and so might cause problems. Unlike other strings it is OK # if this replacement string is a bit longer or shorter than the original.) #replace_string = 00D7, `#caption[qApp_localeName="ja_JP"] {font-family: Sans-SerifJP;}`, `#caption {font-family: Avenir;} </Patch>
khd-368	Disable reading footer	libnickel.so.1.0.0<Patch> patch_name = `Disable reading footer` patch_enable = `no` # Multi-version patch: 3.13.1 - 3.17.3+ find_base_address = `ReadingFooter {\n\tmin-height: 70px;` replace_string = 0000, `ReadingFooter {\n\tmin-height: 70px;\n\tmax-height: 70px;\n\tqproperty-footerMargin: 105;\n}`, `ReadingFooter {\n\theight: 5px;\n}` # find_base_address = `#caption {\n\tfont-size: 16px;` Replace_string = 0000, `#caption {\n\tfont-size: 16px;\n}\n\n#caption[qApp_deviceIsPhoenix="true"] {\n\tfont-size: 20px;\n}`, `#caption {\n\tfont-size: 1px;\n\tcolor: transparent;\n}` </Patch>
khd-367	Ignore book TOC navpoints	librmsdk.so.1.0.0<Patch> patch_name = `Ignore book TOC navpoints` patch_enable = `no` # Multi-version patch: 3.3.0 - 3.17.3+ find_base_address = `\0navPoint\0` replace_string = 0001, `n`, `_` </Patch>
khd-366	Ignore book internal CSS stylesheet	librmsdk.so.1.0.0<Patch> patch_name = `Ignore book internal CSS stylesheet` patch_enable = `no` # Multi-version patch: 3.3.0 - 3.17.3+ find_base_address = `\0stylesheet\0` replace_string = 0001, `s`, `_` find_base_address = `\0style-sheet\0` replace_string = 0001, `s`, `_` </Patch>
khd-365	Default ePub sans-serif font (Gill Sans)	This patch changes the default ePub sans-serif font from Avenir to Gill Sans. To use a different font, change "Gill" in the replacement string to another font name prefix (6 letters max.). For example change "Gill" to "Trebuc" to use a sideloaded Trebuchet font. librmsdk.so.1.0.0<Patch> patch_name = `Default ePub sans-serif font (Gill Sans)` patch_enable = `no` # Multi-version patch: 3.3.0 - 3.17.3+ # # This patch changes the default ePub sans-serif font from Avenir to Gill Sans. # # To use a different font, change "Gill" in the replacement string to another # font name prefix (6 letters max.). For example change "Gill" to "Trebuc" to # use a sideloaded Trebuchet font. # find_base_address = `/normal/Avenir` replace_string = 0000, `/normal/Avenir`, `/normal/Gill` find_base_address = `/bold/Avenir` replace_string = 0000, `/bold/Avenir`, `/bold/Gill` find_base_address = `/italic/Avenir` replace_string = 0000, `/italic/Avenir`, `/italic/Gill` find_base_address = `/bolditalic/Avenir` replace_string = 0000, `/bolditalic/Avenir`, `/bolditalic/Gill` </Patch>
khd-364	Default ePub monospace font (Courier)	This patch lets the EPUB reader use any font with a name beginning "Courier" (such as Courier Prime, available at http://quoteunquoteapps.com/courierprime) as the default monospace font instead of Adobe's proprietary Courier Std font. To use a different font, change "Courier" in the replacement string to another font name prefix (7 letters max.). For example, change `normal/Courier` to `normal/Dark`, `bold/Courier` to `bold/Dark`, etc. to use HP's Dark Courier font available at http://h20000.www2.hp.com/hpsc/swd/public/detail?swItemId=lj611en librmsdk.so.1.0.0<Patch> patch_name = `Default ePub monospace font (Courier)` patch_enable = `yes` # Multi-version patch: 3.3.0 - 3.17.3+ # # This patch lets the EPUB reader use any font with a name beginning "Courier" # (such as Courier Prime, available at http://quoteunquoteapps.com/courierprime) # as the default monospace font instead of Adobe's proprietary Courier Std font. # # To use a different font, change "Courier" in the replacement string to # another font name prefix (7 letters max.). For example, change # `normal/Courier` to `normal/Dark`, `bold/Courier` to `bold/Dark`, etc. to # use HP's Dark Courier font available at # http://h20000.www2.hp.com/hpsc/swd/public/detail?swItemId=lj611en # find_base_address = `CourierStd.otf` replace_string = 0000, `CourierStd.otf`, `normal/Courier` find_base_address = `CourierStd-Bold.otf` replace_string = 0000, `CourierStd-Bold.otf`, `bold/Courier` find_base_address = `CourierStd-Oblique.otf` replace_string = 0000, `CourierStd-Oblique.otf`, `italic/Courier` find_base_address = `CourierStd-BoldOblique.otf` replace_string = 0000, `CourierStd-BoldOblique.otf`, `bolditalic/Courier` </Patch> http://quoteunquoteapps.com/courierprime http://h20000.www2.hp.com/hpsc/swd/public/detail?swItemId=lj611en
khd-363	Fix page breaks bug	The long paragraph bug has since been fixed in the current firmware. However this patch also has the side effect of disabling widows/orphans processing. (So now enabling it has the same effect as setting orphans:1; widows:1; in the stylesheet of all epub books, i.e. it prevents those extra blank lines being added to the bottom of some pages.) librmsdk.so.1.0.0<Patch> patch_name = `Fix page breaks bug` patch_enable = `yes` # # The long paragraph bug has since been fixed in the current firmware. However # this patch also has the side effect of disabling widows/orphans processing. # (So now enabling it has the same effect as setting orphans:1; widows:1; in # the stylesheet of all epub books, i.e. it prevents those extra blank lines # being added to the bottom of some pages.) # replace_bytes = 2C08E4, E6 D0, E6 E7 #Alternative method #replace_bytes = 2C08E4, E6 D0, 00 46 </Patch>
khd-362	Remove PDF page turn arrows at left and right edges of page	libadobe.so<Patch> patch_name = `Remove PDF page turn arrows at left and right edges of page` patch_enable = `no` replace_bytes = 031BFA, F6 1A 1D 44, 00 BF 00 BF replace_bytes = 031C16, C3 EB 09 02 43 44, 00 BF 00 BF 00 BF </Patch>
khd-361	Preserve PDF pan position across page turns	libadobe.so<Patch> patch_name = `Preserve PDF pan position across page turns` patch_enable = `no` replace_bytes = 02227A, 04 46, 98 BD </Patch>
khd-360	Remove PDF map widget shown during panning	libadobe.so<Patch> patch_name = `Remove PDF map widget shown during panning` patch_enable = `no` replace_bytes = 0318EA, 04 46, 1A E0 </Patch>